Overview
It is possible to fully customize your Awair Element's display modes to show your current air quality readings. You can control and set how Awair displays your current air quality readings from the app and interact with the product itself.
This article describes how to adjust your Awair Element's LED Display.
Contents
Awair Element's Display Modes
Awair Element also allows you to set your default display to show the current value of an individual air quality factor: Temperature, Humidity, CO2, Chemicals, and Dust (PM2.5). This is a great mode if you’re focused on managing a specific factor. You can also set the default display to show current time like a clock or to show Awair score indicating overall air quality status.
Your Default Display Mode via the Awair App
You may set your Default Display Mode in your Awair App. To choose your default:
-
Tap on your Awair Element from the Overview screen
-
Tap on the gear icon int he upper right-hand corner to navigate to your Awair Element’s Settings
-
Tap Awair Element Display
-
Enable Customize Default Display.
-
Choose your preferred display mode(Awair score / Individual air quality factor: Temperature, Humidity, CO2, Chemicals, Dust(PM2.5) / Clock)
Manually Adjust Using Rear Toggle
You can manually check the real-time sensor readings by toggling up and down the switch on the back of your Awair Element.
Adjusting Brightness Of Your Display
You can choose the brightness level of your display in the Awair App. There are three modes to choose from:
-
Auto: adjusts the brightness of Awair’s display based on the light in your room.
-
Sleep: turns off Awair’s display when your room is entirely dark.
-
Manual: choose the brightness by dragging the slider to the left and right.
To set your brightness level:
-
Tap on your Awair Element from the Overview screen
-
Tap on the gear icon int he upper right-hand corner to navigate to your Awair Element’s Settings
-
Tap LED Brightness
-
Choose your preferred setting
If you prefer, you can completely disable Awair Element’s display and only access your current air quality readings through the app. Set your brightness to manual, and drag the slider all the way to the left.