Managing Devices in the Awair Dashboard

YouTube Overview

 

Location Settings

Location Details

Organize Devices by Locations and Floors. Optionally add Location Details such as the Street Address and "Working Hours", which will provide additional benefits and capabilities.

Location_Settings.png

 

Location Street Address Search

Type an address or business name to get more accurate positioning.

Location_Street_Address.png

Device Settings

Device Name

Device_Name.png

Device Location and Floor

Device_Location_and_Floor.png

Device Display Settings

Device_Display_Settings.png

Settings
Display On / Off Turn all Display LEDs on or off
Custom Display Awair Score

Awair Score (0 - 100) and sensor Index "dot" columns, which is also represented by the Status LED in the top right:

0 - 60: red

60 - 80: yellow

80 - 100: green

  Temperature (ºC) Temperature in degrees Celsius
  Temperature (ºF) Temperature in degrees Fahrenheit
  Humidity Relative Humidity (%RH)
  CO₂ Carbon Dioxide (ppm)
  TVOCs Total Volatile Organic Compounds (ppb)
  PM2.5 Particulate Matter less than 2.5 microns in diameter (µg/m³)
  Night Light Glow and Glow C products only
  Clock 12-/24-Hour (must be synchronized using the Awair Home app at the moment, or contact hello@getawair.com)
  Infinite Scroll Cycles through all sensors (Temperature, Humidity, CO₂, TVOCs, PM2.5, Clock) and also the battery level indicator.
  Light / Noise Not currently supported
Brightness Auto Automatically dims based on available ambient light (never turns display off)
  Sleep Automatically dims based on available ambient light (automatically turns display off in near darkness)
  Manual

Manually set the display brightness

Tip: it is possible to leave the Status LED (top right RGB) barely visible with all other LEDs completely off by setting brightness just above 0%

 

Device Details & Troubleshooting

Device_Details.png

Device Details
Network The last known WiFi network with which the device was connected.
Device UUID This is the internal Awair Cloud unique device identifier. It is mainly used by Awair systems, but is especially useful when working with the Dashboard Developer APIs. The Device UUID is a concatenation of the {{deviceType}} _ {{deviceId}}
MAC Address

Sometimes referred to as the WiFi MAC or Omni Serial Number.

This can be found on a label on the back of each Omni, a sticker on the outside of the box, or the dark blue onboarding card inside the box.

 

Reboot - remotely power cycle the device

Restore to Factory Settings - "Factory Reset", which is the same behavior as holding down the pinhole-sized button on the back of the Omni in order to put it back into Bluetooth pairing mode (blue blinking Status LED).

Note: for both of these troubleshooting options, the device must be reachable from the Awair Cloud.

 

Bulk Editing

By clicking the "pencil icon" in the top right of each Location section, you can access the bulk editing feature.

Device_Management_-_Bulk_Edit_-_Pencil_Icon.png

Device_Management_-_Bulk_Edit.png

 

Awair Display Mode

Awair_Display_Mode.png

Awair_Display_Mode_Settings.png

Awair_Display_Mode_Example.png

Awair_Display_Mode_Example_-_Light.png Awair_Display_Mode_Example_-_Dark.png Awair_Display_Mode_Example_-_CO2.png

Have more questions? Submit a request